8440-1884 可用于主电压和母线电压

【产品详情】

Woodward INC.制造的EasyGen 2000系列。。这种特殊的控制只能用于柴油或汽油发动机。

该控制器可用于主电压和母线电压，但该控制器一次只能测量两个电压中的一个。参考母线绕组，单相双线(1Ph 2W)的参数整定称为最中性整定。当涉及到终端分配和哪些终端应该布线时，在这个控制中使用的相位与其他相位略有不同。终端23 25 27 29在接下来的阶段，L1和阶段N, L1阶段分配给终端23三个N阶段分配给终端25 27 29。

重要的是要注意，这一系列的控制不带有磁性拾取单元(MPU)，如果需要使用磁性拾取单元，它可以通过终端57和50性连接。用于连接MPU的屏蔽电缆必须通过靠近控制器的单点接地端子。

8440-1884 可用于主电压和母线电压

【英文介绍】

EasyGen 2000 series manufactured by Woodward INC. The 8440-1884 control is one of many we have available in new surplus or used inventory. This special control can only be used on diesel or gasoline engines.

The controller can be used for both main voltage and bus voltage, but the controller can only measure one of the two voltages at a time. With reference to the busbar winding, the parameter setting of single-phase double wire (1Ph 2W) is called the most neutral setting. When it comes to terminal allocation and which terminals should be wired, the phase used in this control is slightly different from the other phases. Terminal 23 25 27 29 In the following stages, L1 and N, phase L1 is assigned to terminal 23 and three N stages are assigned to terminal 25 27 29.

It is important to note that this series of controls does not come with a magnetic pickup unit (MPU), which can be connected via terminals 57 and 50 if a magnetic pickup unit is required. The shielded cable used to connect the MPU must pass through a single point ground terminal near the controller.

8440-1884 可用于主电压和母线电压

【其他型号推荐】