IC660TRD020 直流电源端子组件 集成了阻塞二极管

【产品详情】

IC660TRD020直流电源端子组件属于GE Fanuc Genius I/O系列模块和组件。它具有 24/48 伏直流电压、0 至 60 摄氏度的工作温度范围以及 GE IC660BRD020 I/O 模块兼容性。

IC660TRD020端子组件专为GE Fanuc制造的IC660BRD020直流电源I/O模块而设计。它为I/O模块的每个点都集成了阻塞二极管，提供阻塞和隔离功能。IC660TRD020端子组件适用于冗余T输出配置。该组件还兼容与GE IC660ERD020电子组件集成，以构建完整的I / O模块。接线端子的目的是形成整个I/O块的基础。它的电气和机械设计使其仅适用于具有相同额定电压和接线配置的兼容电子组件。整个模块的现场接线通过IC660TRD020端子组件进行。

IC660TRD020终端程序集存储块的配置设置。这意味着如果拆卸或更换电子组件，用户无需重新配置模块。所有现场接线都连接到该接线端子，以提高模块效率并降低安装成本。当模块通电时，它会为连接器引脚充电。切勿触摸端子组装模块的连接器引脚，以免产生触电危险。还建议将 I/O 块总线直接连接到端子组件中。在卸下或更换 I/O 模块中的端子组件之前，必须始终关闭总线。用户可以在总线和端子组件之间连接中间连接器，以便在移除端子组件时保持总线关键应用进程的数据完整性。

IC660TRD020 直流电源端子组件 集成了阻塞二极管

【英文介绍】

The IC660TRD020 DC power terminal module belongs to the GE Fanuc Genius I/O series modules and components. It features 24/48 volts DC, an operating temperature range of 0 to 60 degrees Celsius, and GE IC660BRD020 I/O module compatibility.

The IC660TRD020 terminal assembly is designed for the IC660BRD020 DC power supply I/O module manufactured by GE Fanuc. It integrates a blocking diode for each point of the I/O module, providing blocking and isolation functions. The IC660TRD020 terminal assembly is suitable for redundant T output configuration. The component is also compatible with integration with the GE IC660ERD020 electronics component to build a complete I/O module. The purpose of the terminal is to form the basis of the entire I/O block. Its electrical and mechanical design makes it suitable only for compatible electronic components with the same voltage rating and wiring configuration. Field wiring of the entire module is performed through the IC660TRD020 terminal assembly.

IC660TRD020 Configuration Settings for the terminal assembly storage block. This means that if the electronic components are removed or replaced, the user does not need to reconfigure the module. All field wiring is connected to this terminal to increase module efficiency and reduce installation costs. When the module is powered on, it charges the connector pins. Do not touch the connector pins of the terminal assembly module to avoid the risk of electric shock. It is also recommended to connect the I/O block bus directly into the terminal assembly. The bus must always be turned off before removing or replacing the terminal assembly in the I/O module. The user can connect an intermediate connector between the bus and the terminal assembly to preserve the data integrity of the bus-critical application process when the terminal assembly is removed.

IC660TRD020 直流电源端子组件 集成了阻塞二极管

【其他型号推荐】