GE Fanuc IC660TPM100 电力监控模块兼容。

【产品详情】

IC660TPM100终端组件由GE Fanuc制造。IC660TPM100端子组件与目录号为IC660BPM100的GE Fanuc电力监控模块兼容。

GE Fanuc IC660TPM100终端组件是GE Fanuc IC660BPM100块的终端组件，它是一个电源监控模块。IC660BPM100功率监控模块专为工业控制系统而设计，它可以精确测量与电流和电压相关的各种特性，即使是失真的波形。IC660BPM100功率监控模块可以测量机器电流和电压、功率因数、瓦特小时和 VAR 的 RMS 值。功率监控模块还可以测量线路频率。IC660BPM100功率监控模块指示系统谐波含量的大小，可用于星形（4线）和三角形（3线）系统。IC660BPM100功率监控模块具有低电流变压器负担，小于0.1 VA。电源块上的集成电源接受 115/230 伏交流电或 125 伏直流输入。

IC660BPM100功率监控模块可以在拆卸电子组件的情况下轻松安装。为模块安装IC660TPM100端子组件所需的步骤包括在模块数据表中指定的位置钻 4 个安装孔，将电子组件与端子组件分开，将位于IC660TPM100端子组件顶部和底部的凹口与钻孔对齐，并使用 12 号螺钉和星形垫圈将其固定到位。块安装过程的下一步是端子拧干。IC660TPM100端子组件与绞合线和实心线兼容。端子组件可以接受裸线或铲形或环形接线片。总线端子与尺寸高达 14 AWG 的铜线兼容。电源和现场接线端子与 10 AWG 电线兼容。

GE Fanuc IC660TPM100 电力监控模块兼容。

【英文介绍】

The IC660TPM100 terminal components are manufactured by GE Fanuc. The IC660TPM100 terminal assembly is compatible with the GE Fanuc power monitoring module whose directory number is IC660BPM100.

The GE Fanuc IC660TPM100 terminal component is the terminal component of the GE Fanuc IC660BPM100 block, which is a power monitoring module. The IC660BPM100 power monitoring module is designed for industrial control systems to accurately measure various characteristics related to current and voltage, even distorted waveforms. The IC660BPM100 power monitoring module measures machine current and voltage, power factor, watt-hours and VAR RMS values. The power monitoring module can also measure line frequency. The IC660BPM100 power monitoring module indicates the magnitude of the harmonic content of the system and can be used in star (4-wire) and triangle (3-wire) systems. The IC660BPM100 power monitoring module has a low current transformer load, less than 0.1VA. The integrated power supply on the power block accepts either 115/230 volts AC or 125 volts DC input.

The IC660BPM100 power monitoring module can be easily installed with the electronic components removed. The steps required to install the IC660TPM100 terminal assembly for the module include drilling 4 mounting holes at the locations specified in the module data sheet, separating the electronic assembly from the terminal assembly, alating the notches located at the top and bottom of the IC660TPM100 terminal assembly with the drill holes, and securing them in place using 12 gauge screws and star washers. The next step in the block installation process is to wring out the terminals. The IC660TPM100 terminal assembly is compatible with twisted and solid wires. The terminal assembly can accept bare wire or shovel or ring connectors. Bus terminals are compatible with copper wires up to 14 AWG in size. Power supply and field terminals are compatible with 10 AWG wires.

GE Fanuc IC660TPM100 电力监控模块兼容。

【其他型号推荐】