HONEYWELL CC-TDOB11  输入输出模块 有控制要求时可以输出信号

HONEYWELL CC-TDOB11  输入输出模块 有控制要求时可以输出信号

制造商:霍尼韦尔产品编号:CC-TDOB11产品类型:数字输出24V1OTA型号系列C 24V数字输出9英寸非余1OTA显示。运输重量5公斤输入输出模块也称为控制模块，在有控制要求时可以输出信号，或者提供一个开关量信号，使被控设备动作，同时可以接收设备的反馈信号，以向主机报告，是火灾报警联动系统中重要的组成部分，市场上的输入输出模块都可以提供一对无源常开/常闭触点，用以控制被控设备，部分厂家的模块可以通过参数设定，设置成有源输出(如海湾GST-LD-8301),相对应的还有双输入输出模块、多输入输出模块等等

HONEYWELLCC-TDOB11  输入输出模块就是开关量信号，1或者0， 模拟量信号，有2种，电压或者电流信号 ，一般是变送器传过来的信号，比如用压力变送器检测水管压力，它会输出一个模拟信号4--20ma 或者 0-10V的信号给PLC，PLC来进行数据处理。 开关量输入点(DI),处理开关量输入信号. 模拟量输入点(AI),处理模拟量输入信号(0-20mADC,0-5VDC). 电阻信号(含热电阻)输入点,处理热电阻或一般电阻信号. 高速脉冲输入点,处理高速脉冲信号. 电压(含热电偶)输入点,处理电压输入或热电偶信号. 还有通讯,用于和上位机交换数据或控制下级控制器仪表驱动器等

HONEYWELL CC-TDOB11  输入输出模块 有控制要求时可以输出信号

Manufacturer: Honeywell Product Number :CC-TDOB11 Product Type: Digital output 24V1OTA Model Series C 24V Digital output 9-inch non-redundant 1OTA display. The input and output module, also known as the control module, can output signals when there are control requirements, or provide a switching signal to make the controlled device act, and can receive the feedback signal of the device to report to the host, which is an important part of the fire alarm linkage system. Input and output modules on the market can provide a pair of passive normally open/normally closed contacts to control the controlled equipment, some manufacturers of the module can be set through parameters, set to active output (such as Gulf GST-LD-8301), the corresponding dual input and output modules, multiple input and output modules and so on

HONEYWELL CC-TDOB11 input and output module is the switching signal, 1 or 0, analog signal, there are two kinds, voltage or current signal, generally the signal transmitted by the transmitter, such as using the pressure transmitter to detect the water pipe pressure, It will output an analog signal 4-20mA or 0-10V signal to the PLC, and the PLC will process the data. The switching input point (DI) processes the switching input signal. Analog input point (AI), processing analog input signals (0-20mADC,0-5VDC). Resistance signal (including thermal resistance) input point, processing thermal resistance or general resistance signal. High-speed pulse input point, processing high-speed pulse signal. Voltage (including thermocouple) input point, processing voltage input or thermocouple signal. There is also communication, which is used to exchange data with the upper computer or control the instrument driver of the lower controller

HONEYWELL CC-TDOB11  输入输出模块 有控制要求时可以输出信号