2198-R031 无源分流模块 外部模块组成

【产品详情】

2198-R031 模块是由 Allen-Bradley 设计和制造的无源分流模块。该分流器已包含在 Kinetix 5700 系列中。无源分流器由一个外部模块组成，该模块为需要超过驱动器的直流母线电源内部分流容量的不同应用提供额外的分流容量。该特定模块带有一个外壳，其结构由电阻线圈组成。Allen-Bradley 2198-R031 无源分流模块要求其上方至少留出 610 毫米的间隙，每侧至少留出 152 毫米的间隙。该模块配有可拆卸盖板和 5/16 六角。螺丝。驱动器可以通过安装在驱动器机柜外部，使可拆卸盖朝上来实现其全部性能。该模块不适用于再生总线电源。

Allen-Bradley 2198-R031 无源并联模块需要安装在通风处，以免过热。为了固定模块，需要使用 M10 紧固件将其固定。该模块的额定电阻为 33 欧姆，连续额定功率为 3100，重量约为 16.8 千克。请注意，对于某些技术人员来说，这个重量可能会导致分流模块有升降危险，因此建议在升降产品时始终小心。Allen-Bradley 2198-R031 无源分流模块的外壳需要通过粘接连接到面板上，以降低称为电磁干扰 （EMI） 的电气噪声。这种键合需要是高频键合，以确保它和模块不会受到EMI的影响。

2198-R031 无源分流模块 外部模块组成

【英文介绍】

The 2198-R031 module is a passive shunt module designed and manufactured by Allen-Bradley. The shunt is included in the Kinetix 5700 series. The passive shunt consists of an external module that provides additional shunt capacity for different applications that require more than the internal shunt capacity of the driver's DC bus power supply. This particular module has a housing whose structure consists of resistance coils. The Allen-Bradley 2198-R031 passive shunt module requires a minimum clearance of 610 mm above it and a minimum clearance of 152 mm on each side. The module is equipped with a removable cover and 5/16 hexagonal. Screws. The drive can achieve its full performance by mounting outside the drive cabinet with the detachable cover facing up. This module is not suitable for regenerative bus power supply.

Allen-Bradley 2198-R031 Passive parallel module needs to be installed in a ventilated place to avoid overheating. In order to secure the module, it needs to be secured using M10 fasteners. The module has a rated resistance of 33 ohms, a continuous power rating of 3100 and a weight of approximately 16.8 kg. Please note that for some technicians, this weight may cause the shunt module to be a lifting hazard, so it is recommended to always be careful when lifting the product. The housing of the Allen-Bradley 2198-R031 passive shunt module needs to be bonded to the panel to reduce electrical noise known as electromagnetic interference (EMI). This bond needs to be a high frequency bond to ensure that it and the module are not affected by EMI.

2198-R031 无源分流模块 外部模块组成

【其他型号推荐】