TRICONEX MP3101S2 可编程逻辑模块

TRICONEX MP3101S2  可编程逻辑模块

TRICONEX MP3101S2  可编程逻辑模块

TRICONEX MP3101S2 英维思 分层结构分布式控制系统

TRICONEX MP3101S2现场总线是工业数字通信家族的一员网络[1]用于实时分布式控制。现场总线配置文件由标准化国际电工委员会(国际电工委员会)作为IEC 61784/61158。
复杂的自动化的工业系统是典型的分层结构分布式控制系统(DCS)。在这个层次结构中，生产管理的上层与的直接控制层相联系可编程逻辑控制器(PLC)通过非时序要求严格的通信系统(例如以太网).现场总线[2]将直接控制级的可编程逻辑控制器链接到现场级工厂中的组件，例如传感器,执行器,电动马达，控制台灯，开关,阀门和接触器并通过以下方式取代直接连接电流回路还是数字的输入－输出信号。因此，TRICONEX MP3101S2对现场总线要求是时序要求严格的并且对成本敏感。新千年以来，许多基于实时以太网已经成立。从长远来看，这些技术有可能取代传统的现场总线。

TRICONEX MP3101S2 invision hierarchical distributed control system

TRICONEX MP3101S2  可编程逻辑模块

TRICONEX MP3101S2 field bus is a member network of industrial digital communication family, which is used for real-time distributed control. Fieldbus configuration file is adopted by the International Electrotechnical Commission for Standardization (IEC) as IEC 61784/61158.

Complex automated industrial system is a typical hierarchical distributed control system (DCS). In this hierarchy, the upper layer of production management is connected with the direct control layer, and the programmable logic controller (PLC) links the PLC of the direct control layer to the components in the field-level factory, such as sensors, actuators, electric motors, control lamps, switches, valves and contactors, through a communication system with strict non-timing requirements (such as Ethernet). The field bus [2] replaces the direct connection of current loops or digital input-output signals in the following ways. Therefore, TRICONEX MP3101S2 is strict in timing requirements for fieldbus and sensitive to cost. Since the new millennium, many real-time Ethernet-based networks have been established. In the long run, these technologies may ｒｅｐｌａｃｅ the traditional fieldbus.

TRICONEX MP3101S2  可编程逻辑模块