GE IC697PWR721 电源模块 提供稳压直流电源输出

【产品详情】

技术规格

额定电压： 24 伏直流电

输入电压范围： 21 至 32 VDC

输入功率： 满载时 156 瓦

输出功率： 90 瓦

底板上的位置： 最左边的插槽或作为独立单元

直流输出： +5VDC、+12 VDC、-12 VDC

 GE Fanuc Automation IC697PWR721电源模块已包含在 GE PLC 的 90-70 系列产品线中，它与 GE IC697 机架和 WME 集成机架完全兼容。该电源模块的主要功能是提供稳压直流电源输出以及TTL。该TTL由TTL兼容逻辑关断信号组成。这意味着，为了使电源模块能够正常运行，需要将其连接到插入机架中电源插槽的电源适配器模块。该模块将连接电源模块输出和机架背板，以监控TTLS信号。GE Fanuc Automation IC697PWR721电源模块无需安装或安装到机架中即可在外部使用。这意味着电源模块可以通过电缆连接到 PSA 和机架。

GE Fanuc Automation IC697PWR721电源模块的标称输入电压额定值为 24 伏直流电，工作电压范围为 21 至 32 伏直流电。该模块的输出功率在满载时最大为 156 瓦，电源模块在 22 伏直流电压下的最大浪涌能量额定值为 32 焦耳。对于其输出选项，电源模块的最大额定输出功率为 90 瓦，电压电流调节额定值为 5、12 和 -12 安培，额定电流分别为 16.5、1.5 和 1 安培。GE Fanuc Automation IC697PWR721电源模块的过压限制为 6 至 7 伏，可在 0 至 60 摄氏度的环境空气温度范围内运行。

客户问答

问题：什么是IC697PWR721？答：IC697PWR721 是 GE Fanuc 24-90 系列的 90 VDC、70W 电源模块，带有适配器。

问题：IC697PWR721有什么特别之处？ 答： 该模块很特别，因为它可以连接到机架的左侧，也可以作为独立单元安装。

问：它提供什么功率输出？ 答： 它提供 +5 V、+12 V 和 -12 V 稳压直流电源输出（以及 TTL 兼容逻辑关断信号）。

问：这个模块由什么组成？ 答： IC697PWR721由电源 （IC697PWR722） 和电源适配器 （IC697PWR720） 组成。

问：IC697PWR721 还提供哪些其他功能？ 答：

工作电压范围：+21 VDC 至 +32 VDC

3 个稳压直流输出电压（总计 90W）：5.16 安培时 +5 VDC 输出、12.1 安培时 +5 VDC 输出和 12.1 安培时 -0 VDC 输出

安装在机架外部

所有输出均提供电子短路过流保护

输入电源故障和系统复位信号

问：此装置能否仅为单个机架应用供电？ 答： 不。是的，该装置可以为单个机架应用供电，但也可用于为第二个机架供电（只要总负载在额定电源范围内）。

问：如果我的IC697PWR721无法正常工作，我的下一步应该是什么？ 答： 您的IC697PWR721可能需要维修。

有关 GE Fanuc 697-721 系列带适配器的 IC24PWR90 90 VDC、70W 电源模块的更多信息，请参阅数据表用户手册。

GE IC697PWR721 电源模块 提供稳压直流电源输出

【英文介绍】

Technical specification

Rated voltage: 24 volts DC

Input voltage range: 21 to 32 VDC

Input power: 156W at full load

Output power: 90 watts

Position on the bottom plate: the leftmost slot or as a stand-alone unit

Dc output: +5VDC, +12 VDC, -12 VDC

The GE Fanuc Automation IC697PWR721 power module is included in the GE PLC 90-70 series product line and is fully compatible with the GE IC697 rack and the WME integrated rack. The main function of the power module is to provide voltage control DC power output and TTL. The TTL consists of a TTL compatible logical turn-off signal. This means that in order for the PSU to function properly, it needs to be connected to a power adapter module that plugs into the power slot in the rack. The module will connect the PSU output to the rack backplane to monitor TTLS signals. GE Fanuc Automation IC697PWR721 Power module can be used externally without mounting or mounting into a rack. This means that the PSU can be connected to the PSA and the rack via cable.

The GE Fanuc Automation IC697PWR721 power supply module has a nominal input voltage rating of 24 volts DC and an operating voltage range of 21 to 32 volts DC. The module has a maximum power output of 156 watts at full load, and the power module has a maximum surge energy rating of 32 joules at 22 volts DC. For its output options, the PSU has a maximum rated output power of 90 watts, voltage and current regulation ratings of 5, 12 and -12 amps, and current ratings of 16.5, 1.5 and 1 amps, respectively. The GE Fanuc Automation IC697PWR721 power supply module has an overvoltage limit of 6 to 7 volts and can operate in an ambient air temperature range of 0 to 60 degrees Celsius.

Customer question and answer

Question: What is IC697PWR721? A: The IC697PWR721 is a 90 VDC, 70W power module of the GE Fanuc 24-90 series with an adapter.

Q: What is so special about IC697PWR721? A: This module is special because it can be attached to the left side of the rack or installed as a standalone unit.

Q: What power output does it provide? A: It offers +5 V, +12 V, and -12 V regulated DC power outputs (as well as TTL compatible logic shutdown signals).

Q: What does this module consist of? A: The IC697PWR721 consists of a power supply (IC697PWR722) and a power adapter (IC697PWR720).

Q: What other features does the IC697PWR721 provide? A:

Operating voltage range: +21 VDC to +32 VDC

Three regulated DC output voltages (total 90W) : 5.16 amps +5 VDC output, 12.1 amps +5 VDC output and 12.1 amps -0 VDC output

It is installed outside the rack

All outputs are protected against electronic short circuit overcurrent

Input power failure and system reset signal

Q: Can this unit power only a single rack application? A: No. Yes, the unit can power a single rack application, but it can also be used to power a second rack (as long as the total load is within the rated power supply range).

Q: If my IC697PWR721 is not working properly, what should be my next step? A: Your IC697PWR721 may need repair.

For more information about the GE Fanuc 697-721 Series IC24PWR90 90 VDC, 70W power module with adapter, see the Datasheet User manual.

GE IC697PWR721 电源模块 提供稳压直流电源输出

【其他型号推荐】