GE  IC670FBI001 现场总线接口  连接器式底座

【产品详情】

现场控制IC670FBI001 I/O 基座的标称额定电压为 115 伏交流电和 125 伏直流电，输入频率范围为 47 至 63 赫兹。基本单元由GE Fanuc制造，在48伏交流电时消耗115伏安的功率，在24伏交流电下消耗125瓦的功率。

用于FBI001的现场总线接口 GE 发那科现场控制IC670 IC670F IC670FB IC670FBI IC670FBI00

IC670FBI001 I/O 底座是用于 GE Field Control 系列的 GE Fanuc I/O 底座。基本单元是支持热插入的连接器式底座，适用于目录号中编号为 IC670C、IC670CH 和 IC670CHS 的产品。IC670FBI001现场控制基础单元具有一个带有屏障端子的接线端子，该接线端子具有键控插槽，可以正确安装模块。I/O 接线端子具有热插入功能，用于安装模块和提供安全的模块安装方法。IC670FBI001底座有一个突出的对齐槽，可以轻松安装模块，并且不会影响系统中连接的其他设备。即使安装模块不需要使用任何特殊工具，用户也必须意识到正确对齐和安全的电缆连接是系统正常工作的必要条件。

GE Fanuc IC670FBI001 I/O 底座连接到电压范围为 90 至 135 伏交流电或 105 至 150 伏直流电的电源。标称额定电压为 115 伏交流电和 125 伏直流电。除此之外，接线端子的标准输入频率为 47 至 63 赫兹。电源输出电压为 6.5 伏直流电，最大保持时间为 20 毫秒。当产品连接到 115 伏交流电源时，满载时的最大额定功耗为 48 伏安。另一方面，在 125 伏交流电压下满载时的最大功耗为 24 瓦。IC670FBI001 I/O 基座的浪涌电流峰值为 20 安培，最长持续时间为 3 毫秒。

GE  IC670FBI001 现场总线接口  连接器式底座

【英文介绍】

The field control IC670FBI001 I/O base has a nominal voltage rating of 115 volts AC and 125 volts DC with an input frequency range of 47 to 63 Hz. The base unit, manufactured by GE Fanuc, consumes 115 volt-amps at 48 volts AC and 125 watts at 24 volts AC.

Fieldbus interface for FBI001 GE Fanuc Field Control IC670 IC670F IC670FB IC670FBI IC670FBI00

The IC670FBI001 I/O base is a GE Fanuc I/O base for the GE Field Control family. The base unit is a hot-insert-enabled connector base for products numbered IC670C, IC670CH, and IC670CHS in catalog numbers. The IC670FBI001 Field control base unit has a terminal with a barrier terminal that has a keyed slot for proper module installation. I/O terminals with hot insertion function are used to install modules and provide a safe method of module installation. The IC670FBI001 base has a prominent alignment slot that makes it easy to mount modules and does not affect other devices connected in the system. Even if the installation of the module does not require the use of any special tools, the user must be aware that proper alignment and secure cable connections are necessary for the proper functioning of the system.

The GE Fanuc IC670FBI001 I/O base connects to a power supply with a voltage range of 90 to 135 volts AC or 105 to 150 volts DC. The nominal rated voltage is 115 volts AC and 125 volts DC. In addition, the standard input frequency of the terminal is 47 to 63 Hz. The output voltage of the power supply is 6.5 volts DC and the maximum hold time is 20 milliseconds. When the product is connected to a 115 volt AC supply, the maximum rated power consumption at full load is 48 volt-amps. On the other hand, the maximum power consumption at full load at 125 volts AC is 24 watts. The IC670FBI001 I/O base has a peak surge current of 20 amps and a maximum duration of 3 milliseconds.

GE  IC670FBI001 现场总线接口  连接器式底座

【其他型号推荐】