GE IS200TSVCH2ADC MRP061873 控制器模块

GE IS200TSVCH2ADC MRP061873 控制器模块

GE IS200TSVCH2ADC MRP061873 控制器模块

IS200TSVCH2A是speedtronic Mark VI 系列下的涡轮机专用端子板服务器。这只是我们库存的几种涡轮机专用 I/O 板之一，因此请确保您买到适合您需求的一款。该板是两通道栅栏式伺服端子板，是系统可用的众多涡轮机专用端子板之一。它称为 I/O 模块，用于在 Speedtronic 系统和现场设备之间建立直接连接。这些板允许用户通过减少或消除无关的仪表和连接点来简化所连接的现场设备及其连接的诊断、监控和维护。包括两个线圈输出和两个脉冲率输入。

IS200TSVCH2A的重量约为 2.25 磅。它旨在作为伺服阀端子板为执行器和外部传感器提供直接接口。

使用这样的板，您可以简化或消除以前在系统和这些外部组件之间使用的许多原始仪器。这降低了单点故障的可能性，同时提高了系统可靠性。它还降低了长期维护的需求和成本。

PCB 有两个可拆卸的栅栏式接线端子。它们位于板的一个长边上。该板具有两个脉冲频率输入，适用于重型、航空气体和蒸汽应用。该板旨在与 PSVOH1B 电池组一起使用。

IS200TSVCH2A 上的其他电路板组件包括四个变压器、三个 D 型外壳连接器和多个垂直插头连接器。该板具有许多跳线开关，每个跳线开关都可以调整为众多选项之一。

采用这种样式，元件位于电路板的两侧。组件上标有参考号，以便于识别。该板有两个可拆卸的栅栏式端子块。它们位于板的一个长边上。

该板具有两个脉冲频率输入，适用于重型、航空气体和蒸汽应用。该板旨在与 PSVOH1B 电池组一起使用。板上的其他板组件包括四个变压器、三个 D 型外壳连接器和多个垂直插头连接器。

该板具有许多跳线开关，每个跳线开关都可以调整为众多选项之一。采用这种样式，元件位于电路板的两侧。组件上标有参考号，以便于识别。

GE IS200TSVCH2ADC MRP061873 控制器模块

The IS200TSVCH2A is a turbine-specific terminal board server under the speedtronic Mark VI series. This is just one of several turbine-specific I/O boards we stock, so make sure you get the right one for your needs. The board is a two-channel fence type servo terminal board, one of many turbine-specific terminal boards available in the system. It is called the I/O module and is used to establish a direct connection between the Speedtronic system and the field equipment. These boards allow users to simplify the diagnosis, monitoring and maintenance of connected field devices and their connections by reducing or eliminating irrelevant meters and connection points. Includes two coil outputs and two pulse rate inputs.

The IS200TSVCH2A weighs about 2.25 pounds. It is designed as a servo valve terminal board to provide a direct interface between actuators and external sensors.

With a board like this, you can simplify or eliminate many of the original instruments that were previously used between the system and these external components. This reduces the possibility of a single point of failure while improving system reliability. It also reduces the need and cost of long-term maintenance.

The PCB has two detachable fence terminals. They are located on one of the long sides of the board. The board has two pulse frequency inputs and is suitable for heavy duty, aviation gas and steam applications. The board is intended for use with the PSVOH1B battery pack.

Other board components on the IS200TSVCH2A include four transformers, three D-housing connectors, and multiple vertical plug connectors. The board has a number of jumper switches, each of which can be adjusted to one of many options.

In this style, the components are located on both sides of the board. Components are marked with reference numbers for easy identification. The board has two detachable fence type terminal blocks. They are located on one of the long sides of the board.

The board has two pulse frequency inputs and is suitable for heavy duty, aviation gas and steam applications. The board is intended for use with the PSVOH1B battery pack. Other board components on the board include four transformers, three D-housing connectors, and multiple vertical plug connectors.

The board has a number of jumper switches, each of which can be adjusted to one of many options. In this style, the components are located on both sides of the board. Components are marked with reference numbers for easy identification.

GE IS200TSVCH2ADC MRP061873 控制器模块