GE IC697MDL640 正/负逻辑分立输入模块 机械键控

【产品详情】

技术规格

额定电压： 125 伏直流电

输入数量： 16 个输入（4 组，每组 4 个）

输入电流： 额定电压下 5 mA

所需电流： 0.3 安培

输入电压范围： -35 至 +145 伏直流电

直流电源： 是的

 GE Fanuc IC697MDL640模块是一个正/负逻辑分立输入模块。它是 GE Fanuc 的产品，作为 90-70 系列的成员制造。它在 125 伏直流电的电压下工作，它有 16 个点，分为 4 个隔离组，每个组 4 个点。该模块与正/负逻辑以及接近开关兼容性兼容。GE Fanuc IC697MDL640 输入模块具有一个输入滤波器，具有 1 毫秒或 10 毫秒的选择能力，而其中一个输入可以配置为中断输入。然而，这些特殊功能取决于GE IC697 PLC的使用。该模块还具有符合IEC标准的输入电流-电压特性。它具有 LED 指示灯，显示电路 PLC 逻辑侧每个点的开/关状态。LED 放置在模块的顶部。

GE Fanuc 90-70 系列IC697MDL640输入模块是类似模块类型的适当替代品，因为它是机械键控的。此外，用户还可以配置输出和输入基准电压源，而无需跳线或DIP开关。配置IC697MDL640输出模块时，通过SNP端口或以太网TCP/IP端口，使用Windows NT或95操作系统上运行的Windows操作系统或MS-DOS软件的配置功能。编程设备可用于对软件配置进行编程。GE Fanuc IC697MDL640输入模块提供正负逻辑功能，这意味着用户将从输入设备接收电流，该设备连接在模块输入和电源总线之间。

GE IC697MDL640 正/负逻辑分立输入模块 机械键控

【英文介绍】

Technical specification

Rated voltage: 125 volts DC

Number of inputs: 16 inputs (4 groups of 4 each)

Input current: 5 mA at rated voltage

Required current: 0.3 amps

Input voltage range: -35 to +145 volts DC

Dc power supply: Yes

The GE Fanuc IC697MDL640 module is a positive/negative logic discrete input module. It is a product of GE Fanuc, manufactured as a member of the 90-70 series. It operates at a voltage of 125 volts direct current, and it has 16 points divided into 4 isolation groups of 4 points each. The module is compatible with positive/negative logic and proximity switches. The GE Fanuc IC697MDL640 input module has an input filter with a selection capability of 1 ms or 10 ms, while one of the inputs can be configured as an interrupt input. However, these special features depend on the use of GE IC697 PLC. The module also has IEC compliant input current-voltage characteristics. It has an LED indicator that shows the on/off status of each point on the PLC logic side of the circuit. The LED is placed on top of the module.

The GE Fanuc 90-70 Series IC697MDL640 input module is a suitable replacement for similar module types because it is mechanically keyed. In addition, users can configure both output and input reference voltage sources without the need for jumpers or DIP switches. When configuring the IC697MDL640 output module, use the SNP port or Ethernet TCP/IP port to configure the Windows operating system or MS-DOS software running on the Windows NT or 95 operating system. Programming devices can be used to program software configurations. The GE Fanuc IC697MDL640 input module provides positive and negative logic function, which means that the user will receive current from the input device, which is connected between the module input and the power bus.

GE IC697MDL640 正/负逻辑分立输入模块 机械键控

【其他型号推荐】