GE IC694MDL730 I/O模块 该输出模块带有 8 个输出

【产品详情】

IC694MDL730输出模块是GE发那科自动化公司生产的RX3i系列I/O模块之一的输出模块。该输出模块带有 8 个输出，共享 1 个公共功率输出。与其他输出模块不同，该模块具有特殊功能，使其能够通过公共或正电源总线将电流源向负载。GE Fanuc自动化IC694MDL730输出模块与电机起动器和指示器等不同设备兼容。它带有单独的 LED，可显示每个输入的单独状态。它还具有保护功能，由两个 5 安培保险丝组成，可保护整个输出组。

GE Fanuc自动化IC694MDL730输出模块的额定电压为12至24伏直流，输出电压范围为12至24伏直流电。现场和逻辑侧之间的隔离电压为 1500 V。输出电流为每点 2 安培。保险丝温度会影响模块使用的电流，在 60 摄氏度时，电流将为 2 安培，而在 50 摄氏度时，电流为 4 安培。根据所使用的温度，可能需要对模块进行缩额。GE Fanuc 自动化IC694MDL730输出模块具有 9.4 安培的浪涌电流，持续 10 毫秒，输出电压降最大为 1.2 伏。响应时间最长为 2 毫秒，模块的额定功耗为 55 毫安，包括所有输出。

GE IC694MDL730 I/O模块 该输出模块带有 8 个输出

【英文介绍】

The IC694MDL730 output module is one of the output modules of the RX3i series I/O modules produced by GE Fanuc Automation. The output module comes with 8 outputs and shares 1 common power output. Unlike other output modules, this module has special features that enable it to direct the current source to the load via a common or positive power bus. The GE Fanuc Automation IC694MDL730 output module is compatible with different devices such as motor starters and indicators. It comes with a separate LED that displays a separate status for each input. It also has protection, consisting of two 5 amp fuses that protect the entire output set.

The GE Fanuc Automation IC694MDL730 output module has a rated voltage of 12 to 24 volts DC and an output voltage range of 12 to 24 volts DC. The isolation voltage between the field and the logical side is 1500 V. The output current is 2 amperes per point. The fuse temperature affects the current used by the module, at 60 degrees Celsius, the current will be 2 amps, while at 50 degrees Celsius, the current will be 4 amps. Depending on the temperature used, the module may need to be shrunk. The GE Fanuc Automation IC694MDL730 output module has a surge current of 9.4 amps for 10 milliseconds and an output voltage drop of up to 1.2 volts. The response time is up to 2 milliseconds, and the module is rated for 55 mah, including all outputs.

GE IC694MDL730 I/O模块 该输出模块带有 8 个输出

【其他型号推荐】