GE STXDNS032 直流输入模块 网络适配器模块

【产品详情】

STXDNS032 DeviceNet 网络适配器模块是由 GE Fanuc 制造的 32 点直流输入模块。它是GE RSTi系统中的第一个模块。该模块支持自动波特率选择，具有每秒 3、125 和 250 KB 的 500 种通信速度。STXDNS032 DeviceNet 网络适配器模块在作为从设备与主设备通信时，使用多种网络协议，例如轮询、位选通、循环和 COS 协议。它需要一个额定电压为 24 伏直流的电源，电源电压范围为 11 至 28.8 伏直流，输出电流限制为 1.2 安培，并具有反极性保护。该模块的额定功率为 40 毫安（24 伏直流电）。

STXDNS032 DeviceNet 网络适配器模块带有一个 5 针开放式公连接器作为模块的接口连接器和 2 个用于配置的旋转开关。它为 I/O 驱动器隔离提供内部逻辑，并通过 I/O 模块充当现场设备和现场总线之间的链路。它通过消除昂贵的并联布线来降低布线成本。I/O站采用灵活的模块化结构，可轻松扩展。STXDNS032 DeviceNet 网络适配器模块最多可处理 64 个节点，包括主节点。其可拆卸端子组件由弹簧夹端子组成，可用于将传感器和执行器连接到 RSTi 模块。该模块可以很容易地安装在DIN导轨上，只需轻轻按下，直到它发出咔嗒声并锁定到位。这允许用户在不断开或干扰所有接线的情况下更换模块。

GE STXDNS032 直流输入模块 网络适配器模块

【英文介绍】

The STXDNS032 DeviceNet Network adapter module is a 32-point DC input module manufactured by GE Fanuc. It is the first module in the GE RSTi system. The module supports automatic baud rate selection with 500 communication speeds of 3, 125 and 250 kilobits per second. The STXDNS032 DeviceNet network adapter module uses a variety of network protocols such as polling, bit strobe, loop, and COS protocols when communicating with the master device as a slave device. It requires a power supply rated at 24 volts DC, with a power supply voltage range of 11 to 28.8 volts DC, a limited output current of 1.2 amps, and reverse polarity protection. The module is rated at 40 MA (24 volts DC).

The STXDNS032 DeviceNet network adapter module comes with a 5-pin open male connector as the interface connector for the module and 2 rotary switches for configuration. It provides internal logic for I/O drive isolation and acts as a link between the field device and the fieldbus via an I/O module. It reduces wiring costs by eliminating expensive parallel wiring. The I/O station has a flexible modular structure that can be easily expanded. The STXDNS032 DeviceNet network adapter module can handle up to 64 nodes, including the master node. Its detachable terminal assembly consists of spring clamp terminals and can be used to connect sensors and actuators to RSTi modules. The module can be easily mounted on the DIN rail with a light press until it clicks and locks into place. This allows the user to replace the module if all the wiring is constantly on or interfered with.

GE STXDNS032 直流输入模块 网络适配器模块

【其他型号推荐】