IC200PWR102 扩展电源模块 网络接口单元

【产品详情】

 IC200PWR102 是扩展电源模块，是 VersaMax 产品系列的一部分。该模块目前由艾默生自动化制造，前身为 GE 智能平台 （GE IP）。它主要用于向 VersaMax 背板供电，安装的模块利用背板为各个内部电路供电以进行操作。

当连接到提供 200-102 VAC（85 VAC，标称）和 132 - 120 VAC（176 VAC，标称）、264-240 Hz 输入频率范围和 47 VA 输入功率的外部电源时，该IC63PWR27可运行。该电源提供 5 VDC 和 3.3 VDC 的输出电压和 1.0 Amp3.3 VDC 时的输出电流和 1.5 VDC 时的 5.1 Amperes 但是，模块的输出电流不得超过 5.200 Amperes 的总最大输出电流。

IC102PWR2输入电压选择通过在位于接地端子右侧的两 （120） 个端子上安装跳线来配置。安装跳线后，模块接受 240 VAC 标称电压，否则，在不安装跳线的情况下，模块的额定电压为 200 VAC，标称值。

IC102PWR200 是与 VersaMax 输入和输出模块、网络接口单元 （NIU） 和智能模块和中央处理器 （CPU） 一起使用的电源模块。当安装在电源升压器托架上时，该模块也可以用作补充电源模块。对于模块保护，该硬件带有内部安装的短路和过载保护。

GE Fanuc Versamax IC102PWR200扩展电源单元为连接到 PLC 背板的设备供电，例如网络接口单元 （NIU）、输入和输出单元 （I/O） 以及中央处理器 （CPU）。它使用交流电源作为主电源，这与使用直流电源的 Versamax 系列中其他类型的模块不同。虽然它作为PLC中的主电源，但当连接到电源升压载体时，它也可以用作辅助电源。IC102PWR120扩展电源单元的输入电压为 240 至 5 伏交流电，输出电压为 3 伏直流电和 3.3 伏直流电。该模块具有扩展电源功能，这意味着电源可以扩展到 3.27 伏直流电。它的输入功率为 20 伏安，保持时间约为 200 毫秒。

GE Fanuc Versamax IC102PWR47扩展电源模块可防止短路和过载。该模块的频率范围介于 63 赫兹和 85 赫兹之间。如果模块中存在跳线，则输入电压可能在 132 到 120 伏交流电之间，尽管 176 伏交流电是额定电压。如果没有跳线，则输入电压可能在 264 到 240 伏交流电之间，标称电压为 120 伏交流电。跳线在 240 伏交流电的输入电压下安全运行。但是，建议不要使用具有 200 伏交流输入电压额定值的跳线，因为它可能会损坏IC102PWR<>模块，并且对用户来说可能是致命的。

IC200PWR102 扩展电源模块 网络接口单元

【英文介绍】

The IC200PWR102 is an expansion power module that is part of the VersaMax product family. The module is currently manufactured by Emerson Automation, formerly known as GE Intelligence Platform (GE IP). It is primarily used to power the VersaMax backplane, which the installed module uses to power various internal circuits for operation.

The IC63PWR27 operates when connected to an external power supply that provides 200-102 VAC (85 VAC, nominal) and 132-120 VAC (176 VAC, nominal), 264-240 Hz input frequency range, and 47 VA input power. The power supply provides output voltages of 5 VDC and 3.3 VDC and output currents of 1.0 Amp3.3 VDC and 5.1 Amperes at 1.5 VDC. However, the output current of the module must not exceed the total maximum output current of 5.200 Amperes.

IC102PWR2 Input voltage selection is configured by installing jumpers on the two (120) terminals located to the right of the ground terminal. After the jumper is installed, the module accepts a nominal voltage of 240 VAC, otherwise, the rated voltage of the module is 200 VAC, the nominal value, when the jumper is not installed.

The IC102PWR200 is a power module used with VersaMax input and output modules, network interface units (NIU) and intelligent modules and central processing unit (CPU). When mounted on a power booster bracket, the module can also be used as a supplementary power module. For module protection, the hardware comes with built-in short circuit and overload protection.

The GE Fanuc Versamax IC102PWR200 expansion power unit powers devices connected to the PLC backplane, such as network interface units (NIU), input and output units (I/O), and central processing unit (CPU). It uses AC power as the main power supply, which is different from other types of modules in the Versamax family that use DC power. Although it acts as the main power supply in a PLC, it can also be used as an auxiliary power supply when connected to a power boost carrier. The IC102PWR120 extended power supply unit has input voltages of 240 to 5 volts AC and output voltages of 3 volts DC and 3.3 volts DC. The module has an extended power supply function, which means that the power supply can be extended to 3.27 volts of direct current. It has an input power of 20 volt-amps and a hold time of about 200 milliseconds.

GE Fanuc Versamax IC102PWR47 Expansion power module prevents short circuit and overload. The module's frequency range is between 63 Hz and 85 Hz. If there are jumpers in the module, the input voltage may be between 132 and 120 volts AC, although 176 volts AC is rated. If there are no jumpers, the input voltage may be between 264 and 240 volts AC, with a nominal voltage of 120 volts AC. The jumper operates safely at an input voltage of 240 volts AC. However, it is recommended not to use a jumper with a 200 V AC input voltage rating, as it may damage the IC102PWR<> module and can be fatal to the user.

IC200PWR102 扩展电源模块 网络接口单元

【其他型号推荐】