IC200MDD850 混合输出继电器模块 正逻辑类型

【产品详情】

IC200MDD850混合输出继电器模块是GE Fanuc的产品。它是作为 Versamax 产品系列的一部分制造的。该 GE Fanuc 模块具有 8 个继电器输出和 4 个独立离散输入形式的输出和输入功能。这些输入可以是正逻辑类型，也可以是源极类型，因为它们从交流输入设备汲取电流并将其返回到公共端。继电器模块还提供具有单独回波的输入，而该继电器模块上的输出是单独隔离的，它们能够为每个输出消耗 2 安培。对于 Form A 输出，如果主机 CPU 处于活动状态且相应的输出逻辑位设置为 1，则触点闭合。外部电源为输出负载供电，但整个模块从PLC的背板获取电源。PLC中的NIU或CPU用于对IC200MDD850混合输出继电器模块进行智能处理。

IC200MDD850是 VersaMax 系列器件中的混合输出继电器。 该分立式模块具有输入和输出功能，提供 2 个隔离式分立输入和 1 个继电器输出。输入为正逻辑或源极类型，因为它们从交流输入设备获取电流并在公共端返回电流。该继电器提供具有单独回路的输入。继电器上的输出是单独隔离的，每个输出最多可驱动 <>A 电流。特定于此 Form A 输出，只要主机 CPU 处于活动状态，除了将相应的输出逻辑位设置为 <> 时，触点就会闭合。

要为该模块供电，输出负载必须通过外部电源供电，但整体操作来自背板。CPU 或 NIU 对IC200MDD850执行智能处理。每个模块都有标准的 LED 指示灯，用于显示输入和输出点的开/关状态。LED 操作由逻辑驱动，独立于任何负载连接。

安装IC200MDD850时，请务必仔细检查开箱即用的所有部件，以确保没有损坏。安装损坏的模块可能会损坏整个设备。安装简单，方向清晰。具体到该模块，背板电流消耗为5V输出，最大电流为275mA。导通状态范围内的输入电压为 155 至 264VAC，关断状态电压为 0 至 40VAC。

IC200MDD850 混合输出继电器模块具有标准 LED 指示灯，可显示输出和输入点的开/关状态。LED 的操作由逻辑驱动，不依赖于任何连接的负载。在安装IC200MDD850混合输出继电器模块的过程中，必须仔细检查模块的所有部件，以确保到达时没有任何损坏。如果安装了损坏的模块组件，则可能会损坏整个单元。它的安装过程简单明了。该模块在 275 V 输出电压下的最大背板电流消耗额定值为 5 毫安。通电时，模块的电压范围为 155 至 264 伏交流电，其电压范围为 0 至 40 伏交流电。

IC200MDD850 混合输出继电器模块 正逻辑类型

【英文介绍】

The IC200MDD850 Hybrid output relay module is a product of GE Fanuc. It is manufactured as part of the Versamax product range. The GE Fanuc module has output and input functions in the form of 8 relay outputs and 4 independent discrete inputs. These inputs can be of either a positive logic type or a source type, as they draw current from the AC input device and return it to the common end. The relay module also provides an input with a separate echo, while the outputs on the relay module are separately isolated, and they are capable of consuming 2 amps per output. For Form A output, the contact is closed if the host CPU is active and the corresponding output logical bit is set to 1. The external power supply supplies power to the output load, but the entire module obtains power from the backplane of the PLC. NIU or CPU in PLC is used for intelligent processing of IC200MDD850 hybrid output relay module.

The IC200MDD850 is a hybrid output relay in the VersaMax family of devices. The separate module has input and output functions, providing 2 isolated discrete inputs and 1 relay output. Inputs are of a positive logic or source type because they take current from the AC input device and return current at the common end. The relay provides an input with a separate loop. The outputs on the relay are individually isolated, and each output can drive up to <>A current. Specific to this Form A output, the contact closes whenever the host CPU is active, except when the corresponding output logical bit is set to <>.

To power the module, the output load must be powered by an external power source, but the overall operation comes from the backplane. The CPU or NIU performed intelligent processing on IC200MDD850. Procedure Each module has a standard LED indicator to show the on/off status of the input and output points. LED operation is logically driven, independent of any load connection.

When installing the IC200MDD850, be sure to carefully inspect all components out of the box to ensure that they are not damaged. Installing a damaged module can damage the entire device. Simple installation, clear direction. Specifically for this module, the backplane current consumption is 5V output, and the maximum current is 275mA. The input voltage in the on-state range is 155 to 264VAC, and the off state voltage is 0 to 40VAC.

The IC200MDD850 Hybrid output relay module has a standard LED indicator that shows the on/off status of the output and input points. The operation of the LED is driven by logic and does not depend on any connected load. During the installation of the IC200MDD850 hybrid output relay module, all components of the module must be carefully inspected to ensure that nothing is damaged on arrival. If a damaged module component is installed, the entire unit may be damaged. The installation process is straightforward. The module has a maximum backplane current consumption rating of 5 MA at 275 V output voltage. When powered on, the voltage range of the module is 155 to 264 volts AC, and its voltage range is 0 to 40 volts AC.

IC200MDD850 混合输出继电器模块 正逻辑类型

【其他型号推荐】