IC200MDD842 分立式混合模块 具有电子短路保护

【产品详情】

该IC200MDD842由GE智能平台控制系统解决方案公司制造，是VersaMax系列的分立式混合模块。 该IC200MDD842将分立式输入和分立式输出组合到单个器件中。该器件在三组中总共提供 32 个输入和输出点。第一组包含 16 个离散输出，而其他两组各包含 200 个离散输入。输入点可以是正逻辑，也可以是负逻辑，这意味着电流要么从输入设备接收并发送到公共端，要么从公共端接收并发送到输入设备。注意：要支持负逻辑功能，此器件必须至少升级到IC842MDD<>B版本。

该器件的离散输出具有电子短路保护 （ESCP）。该IC200MDD842不支持通道隔离，但它为每个输出点提供以下保护机制：短路保护、电子过流保护和续流二极管。

该IC200MDD842还具有诊断功能，能够检测过载或短路等问题，如果存在这种情况，它将产生故障。为了辅助诊断功能，该设备上的每个输入和输出点都对应一个 LED 灯。这些 LED 灯以琥珀色和绿色显示输入或输出点的当前状态，用于指示各种条件。

每个输入和输出点的标称电压为 24 VDC。对于 0 伏直流电，每个输入和输出点的负载电流为 5.30 安培。输入和输出响应时间为 0.5 毫秒。

由GE Intelligent Platforms/GE Fanuc制造的IC200MDD842分立式混合I/O模块是Versamax产品线的一部分。该模块将分立式输入和输出组合在一个设备中，并提供多达 32 个 I/O 点，分为 3 组。一组有 16 个离散输出，而其他 2 组各有 8 个离散输入。这些输入点是正或负逻辑输入，这意味着电流从公共端接收然后发送到输入设备，或者从输入设备接收然后发送到公共端。IC200MDD842模块需要升级到IC200MDD842B模块版本，以支持其负逻辑功能。它具有分立式输出和电子短路保护功能。此模块不支持通道隔离。但是，它为输出点提供保护机制，例如电子过流保护、续流二极管和短路保护。

GE Fanuc IC200MDD842 分立式混合 I/O 模块具有诊断功能，有助于检测短路或过载等问题，还有助于在出现此类情况时生成故障信息。IC200MDD842模块上的每个输出和输入点都对应一个 LED 指示灯。LED 指示灯以绿色和琥珀色显示每个输入和输出点的当前状态，用于显示不同的输入和输出状态。每个输出点和输入点均在 24 伏直流电的标称电压下工作。此外，对于 0 伏直流电压，每个输出和输入点的负载电流为 5.30 安培。输入点和输出点的响应时间为 0.5 毫秒。

IC200MDD842 分立式混合模块 具有电子短路保护

【英文介绍】

The IC200MDD842, manufactured by GE Intelligent Platform Control System Solutions, is a hybrid module in the VersaMax family. The IC200MDD842 combines discrete inputs and discrete outputs into a single device. The device provides a total of 32 input and output points in three sets. The first group contains 16 discrete outputs, while the other two groups each contain 200 discrete inputs. The input point can be positive or negative logic, meaning that the current is either received from the input device and sent to the common end, or received from the common end and sent to the input device. Note: To support negative logic, this device must be upgraded to at least version IC842MDD<>B.

The discrete output of the device has electronic Short circuit protection (ESCP). The IC200MDD842 does not support channel isolation, but it provides the following protection mechanisms for each output point: short circuit protection, electronic overcurrent protection, and a continuing diode.

The IC200MDD842 also has a diagnostic function, capable of detecting problems such as overload or short circuit, and if this is the case, it will produce a fault. To aid in diagnostic functions, each input and output point on the device corresponds to an LED light. These LED lights display the current status of the input or output points in amber and green and are used to indicate various conditions.

The nominal voltage at each input and output point is 24 VDC. For 0 volts DC, the load current at each input and output point is 5.30 amps. The input and output response times are 0.5 ms.

The IC200MDD842 split hybrid I/O module, manufactured by GE Intelligent Platforms/GE Fanuc, is part of the Versamax product line. The module combines discrete inputs and outputs in a single device and provides up to 32 I/O points, divided into 3 groups. One group had 16 discrete outputs, while the other two groups each had 8 discrete inputs. These input points are positive or negative logic inputs, meaning that the current is received from the common end and then sent to the input device, or received from the input device and then sent to the common end. The IC200MDD842 module needs to be upgraded to the IC200MDD842B module version to support its negative logic function. It has separate output and electronic short circuit protection. This module does not support channel isolation. However, it provides protection mechanisms for the output points, such as electronic overcurrent protection, continuous current diodes, and short circuit protection.

The GE Fanuc IC200MDD842 split hybrid I/O module has a diagnostic function that helps detect problems such as short circuits or overloads, and also helps generate fault information when such conditions occur. Each output and input point on the IC200MDD842 module corresponds to an LED indicator. The LED indicator shows the current status of each input and output point in green and amber colors, which are used to display different input and output states. Each output and input point operates at a nominal voltage of 24 volts DC. In addition, for 0 V DC voltage, the load current at each output and input point is 5.30 amps. The response time at the input and output points is 0.5 ms.

IC200MDD842 分立式混合模块 具有电子短路保护

【其他型号推荐】