GE IC200ALG620 模拟输入模块 电阻温度检测器

【产品详情】

客户问答

问题：什么是IC200ALG620？答：IC200ALG620是GE Fanuc Versamax系列的4通道、16位RTD、模拟输入模块。

问：渠道有哪些特点？ 答： IC3ALG4上有四个 200 线和/或 620 线 RTD 通道。

问：OK LED 表示什么？ 答： 绿色表示背板电源存在，琥珀色表示模块故障。

问：背板电流消耗是多少？ 答：5V输出：最大125mA

问：有外接电源吗？ 答： 不

问：配置参数是什么？答：无

问：此模块接受哪些输入？ 答： 该模块接受来自 4 个独立的 3 线和/或 4 线铂、镍、镍/铁或铜 RTD 的输入。

问：每个通道的更新速率是多少？ 答案：210 毫秒 @ 60 赫兹，230 毫秒 @ 50 赫兹

IC200ALG620是由艾默生自动化制造的 VersaMax 模拟输入模块。该模块是电阻温度检测器（RTD）模块，用于温度测量和传感器的集成。该模块是一个 4 通道 RTD/电阻模拟输入模块，可与各种 RTD 传感器一起使用，包括铂 25、100 和 1000 欧姆;铜 10、50 和 100 欧姆;镍 100 和 120 欧姆;和镍/铁 604 欧姆和直接输入电阻值范围，例如 0-500 欧姆和 0-3000 欧姆。

该IC200ALG620支持 3 线和 4 线 RTD 传感器。每个通道都有一个专用的模数 （ADC） 转换器电路，转换分辨率为 16 位。该模块在用于电阻测量时具有 +/–25.0% 的测量精度（在 15 摄氏度时），在 RTD（温度）测量模式下具有 +/-0.15% 的测量精度。每个输入通道都能够检测开路RTD、输入短路、欠程、超量程、非易失性存储器存储故障、接线故障和高/低报警。这些故障和报警情况被报告给主机可编程逻辑控制器 （PLC） 进行集成。该模块的更新速率为 210 Hz 时每通道 60 ms，230 Hz 时每通道 50 ms。它还安装了一个 OK LED，当亮起绿色时，该 LED 指示提供给模块的背板电源处于活动状态，当亮起琥珀色时，指示模块故障。该模块在 125.5 VDC 总线输出时的背板电流消耗为 0 mA，在 125.3 VDC 总线输出时为 3 mA。

IC200ALG620模块是GE Fanuc制造的16位模块。它是一个模拟输入模块，设计有 4 个通道。它提供 16 位的分辨率。它的工作电压为 5 伏，更新速率为 210 毫秒。它配备了LED指示灯，可帮助用户了解模块的不同状态。它具有 FLD PWR LED 和 OK LED。FLD PWRLED 显示电路中存在背板电源和励磁电源。OK LED 显示模块的正常运行。当模块中出现诊断错误时，它会呈琥珀色亮起。当模块正在更新或处于启动模式时，LED 呈绿色闪烁。它总共消耗 125 毫安的电流，来自 5 伏总线。

IC200ALG620模块具有 250 伏交流隔离，用于用户输入到逻辑，1500 伏交流隔离，持续 60 秒，用于用户输入到帧。它总共消耗 125 毫安的电流。它可以以 50 到 60 赫兹的频率更新，具体取决于频道。该模块的共模抑制比为 120 dB，频率为 50 至 60 赫兹，跨度为 100%。在相似频率下，正常模式抑制为60 dB。IC200ALG620模块在清洁环境中的工作温度不应超过60摄氏度。IC200ALG620模块易于配置和安装。在安装过程中，模块应正确接地，以免触电损坏。

GE IC200ALG620 模拟输入模块 电阻温度检测器

【英文介绍】

Customer question and answer

Question: What is IC200ALG620? A: The IC200ALG620 is a 4-channel, 16-bit RTD, analog input module of the GE Fanuc Versamax family.

Q: What are the characteristics of channels? A: There are four 200-line and/or 620-line RTD channels on IC3ALG4.

Q: What does OK LED stand for? A: The green color indicates that the backplane power supply exists, and the amber color indicates that the module is faulty.

Q: What is the backplane current consumption? A: 5V output: 125mA Max

Q: Is there an external power supply? A: No

Q: What are the configuration parameters? A: None

Q: What input does this module accept? A: The module accepts input from four separate 3-wire and/or 4-wire platinum, nickel, nickel/iron or copper RTDS.

Q: What is the update rate for each channel? Answer: 210 ms @ 60 Hz, 230 ms @ 50 Hz

The IC200ALG620 is a VersaMax analog input module manufactured by Emerson Automation. The module is a resistance temperature detector (RTD) module for temperature measurement and sensor integration. The module is a 4-channel RTD/ resistance analog input module that can be used with a variety of RTD sensors, including platinum 25, 100 and 1000 ohms; Copper 10, 50 and 100 ohms; Nickel 100 and 120 ohms; And nickel/iron 604 ohms and direct input resistance ranges, such as 0-500 ohms and 0-3000 ohms.

The IC200ALG620 supports 3 - and 4-wire RTD sensors. Each channel has a dedicated analog-to-digital (ADC) converter circuit with a conversion resolution of 16 bits. The module has a measurement accuracy of +/- 25.0% when used for resistance measurement (at 15 degrees Celsius) and +/-0.15% in RTD (temperature) measurement mode. Each input channel is capable of detecting open RTDS, input short circuits, underruns, overranges, nonvolatile memory storage failures, wiring failures, and high/low alarms. These faults and alarms are reported to the host programmable logic controller (PLC) for integration. The module has an update rate of 60 ms per channel at 210 Hz and 50 ms per channel at 230 Hz. It also has an OK LED, which indicates that the backplane power supply to the module is active when it lights up green, and that the module is faulty when it lights up amber. The backplane current consumption of the module is 0 mA at 125.5VDC bus output and 3 mA at 125.3VDC bus output.

The IC200ALG620 module is a 16-bit module manufactured by GE Fanuc. It is an analog input module designed with 4 channels. It provides 16 bit resolution. It operates at 5 volts and has an update rate of 210 milliseconds. It is equipped with LED indicators to help users understand the different states of the module. It has FLD PWR LED and OK LED. There are backplane power supply and excitation power supply in the FLD PWRLED display circuit. OK The normal operation of the LED display module. It lights up amber when a diagnostic error occurs in the module. When the module is being updated or in startup mode, the LED flashes green. It consumes a total of 125 milliamps of current from the 5 volt bus.

The IC200ALG620 module has 250 volt AC isolation for user input to logic and 1500 volt AC isolation for 60 seconds for user input to frame. It consumes a total of 125 milliamps of current. It can be updated at 50 to 60 Hertz, depending on the channel. The module has a common mode rejection ratio of 120 dB, a frequency of 50 to 60 Hz, and a span of 100%. At similar frequencies, normal mode suppression is 60 dB. The operating temperature of the IC200ALG620 module in a clean environment should not exceed 60 degrees Celsius. The IC200ALG620 module is easy to configure and install. During the installation, the module should be properly grounded to avoid damage by electric shock.

GE IC200ALG620 模拟输入模块 电阻温度检测器

【其他型号推荐】