GE IC755CKS06RDMEP 快速面板 提供视觉状态更新

【产品详情】

 GE Fanuc IC755CKS06RDMEP 终端是带有 RSTi-ED Modbus TCP 的 Quickpanel+ 终端。终端上的显示屏尺寸为 6 英寸。

GE Fanuc QuickPanel+ IC755CKS06RDMEP终端是一款带有 6 英寸屏幕和 RSTi-ED Modbus TCP 的终端。IC755CKS06RDMEP端子有 1 个三色 LED，可提供视觉状态更新。该操作系统是 Microsoft Windows Embedded Compact 7 操作系统，是一个带有 GUI 的 32 位系统，它存储在闪存中，并复制到系统 DRAM 中执行。可以通过插入包含更新固件的 SD 卡并执行设备手册中描述的步骤来升级IC755CKS06RDMEP终端上的固件。收到装有IC755CKS06RDMEP端子的包装时，应检查是否有损坏。如果IC755CKS06RDMEP端子有明显损坏，则不应通电。

IC755CKS06RDMEP端子尺寸为 192 x 137 x 36 毫米。面板安装端子需要尺寸为 183.5 x 128.5 毫米的开孔。在IC755CKS06RDMEP端子上安装夹紧螺钉的扭矩范围为 0.3 N-m。IC755CKS06RDMEP端子还可以安装在市售的 VESA MIS-D 臂、支架或任何符合 UL1678 标准的设备上。IC755CKS06RDMEP端子背面的安装孔需要与尺寸为 4 毫米或更小的 M6 螺钉一起使用。安装 M4 螺钉的扭矩范围为 0.7 至 0.8 N-m。IC755CKS06RDMEP终端配备 1 GHz ARM A8 处理器、512 兆字节的 DRAM 和 5.7 英寸 TFT LCD 触摸屏显示器。通信接口包括以太网、USB 和串行接口。IC755CKS06RDMEP端子可以由 24 伏直流电源供电，最大电流为 0.625 安培。环境工作温度范围为 32 至 131 华氏度。

GE IC755CKS06RDMEP 快速面板 提供视觉状态更新

【英文介绍】

The GE Fanuc IC755CKS06RDMEP terminal is a Quickpanel+ terminal with RSTi-ED Modbus TCP. The display on the terminal is 6 inches.

The GE Fanuc QuickPanel+ IC755CKS06RDMEP terminal is a terminal with a 6-inch screen and STI-ED Modbus TCP. The IC755CKS06RDMEP terminal has a three-color LED to provide visual status updates. The operating system, Microsoft Windows Embedded Compact 7, is a 32-bit system with a GUI that is stored in flash memory and copied to system DRAM for execution. You can upgrade the firmware on the IC755CKS06RDMEP terminal by inserting the SD card that contains the updated firmware and performing the steps described in the device manual. Upon receipt of a package containing the IC755CKS06RDMEP terminal, check for damage. If the IC755CKS06RDMEP terminal is significantly damaged, it should not be powered on.

The IC755CKS06RDMEP terminal is 192 x 137 x 36 mm. Panel mounting terminals need 183.5 x 128.5 mm openings. The torque range for installing clamping screws on IC755CKS06RDMEP terminals is 0.3-m. The IC755CKS06RDMEP terminals can also be installed on commercially available VESA MIS-D arms, brackets, or any UL1678-compliant device. The mounting holes on the back of the IC755CKS06RDMEP terminals need to be used with M6 screws of 4 mm or less in size. The torque range for installing M4 screws is 0.7 to 0.8 N-m. The IC755CKS06RDMEP terminal is equipped with a 1 GHz ARM A8 processor, 512 megabytes of DRAM, and a 5.7-inch TFT LCD touchscreen display. Communication interfaces include Ethernet, USB and serial interfaces. The IC755CKS06RDMEP terminal can be powered by a 24-volt DC supply with a maximum current of 0.625 amps. Ambient operating temperature range is 32 to 131 degrees Fahrenheit.

GE IC755CKS06RDMEP 快速面板 提供视觉状态更新

【其他型号推荐】