GE IC670CHS102 接线端子带盒式端子

【产品详情】

GE Fanuc IC670CHS002 / IC670CHS102 接线端子带盒式端子，是通用接线底座，提供模块安装、背板通信和用户连接端子。一个接线端子上可以安装两个模块。模块拧到接线端子上以增强抗振性。模块可以在不干扰现场接线的情况下拆卸。

对于每个 I/O 模块，有三个隔离的公共端子组：A 组（内部连接在一起）和 B 组（内部连接在一起）通常用于电源连接。E 组有五个公共端子，它们在内部连接在一起并与电源和点端子隔离。它们可以用作应用布线。端子 1-16 用于 I/O 接线。

每个端子最多可容纳一个 AWG #14（2.1 毫米）2） 或两个 AWG #18（0.86 毫米2） 通过 AWG #22 （.35 mm2） 电线，使用额定温度为 90°C 的铜线。 建议的终端扭矩为 4.5 英寸/磅。通过任何一个端子的最大电流为 10 安培。

 GE Fanuc现场控制IC670CHS102 I/O基本接线端子用作接线到板接口，用于将GE Fanuc I/O模块与现场设备接线连接，而无需直接物理连接这些模块。使用这种类型的接线端子而不是直接模块连接有助于保持面板井然有序，避免混乱的布线配置，并通过允许插入和移除模块（即使电源尚未关闭）也可以轻松进行故障排除。GE Fanuc IC670CHS102 I/O 基本接线端子具有 t3 个独立的端子连接点组，这些连接点之间共享公共连接，但彼此隔离。这些组称为组 A、B 和 E.组 A 和 B 用于电源连接，而组 E 用作应用布线的公共参考点。

GE IC670CHS102 接线端子带盒式端子

【英文介绍】

 GE Fanuc Field control IC670CHS102 I/O Basic wiring terminals are used to connect GE Fanuc I/O modules to field device cables without directly connecting the modules. Using this type of terminal instead of a direct module connection helps keep the panel organized, avoids messy cabling configurations, and allows for easy troubleshooting by allowing modules to be inserted and removed even if the power has not been turned off. The GE Fanuc IC670CHS102 I/O base terminal has t3 independent groups of terminal connection points that share a common connection but are isolated from each other. These groups are called groups A, B, and E. Groups A and B are used for power connections, while group E is used as a common reference point for application wiring.

GE Fanuc IC670CHS002 / IC670CHS102 Wiring terminals With box terminals are common wiring bases that provide module installation, backplane communication, and user connection terminals. Two modules can be installed on one terminal. The module is screwed onto the terminal to enhance vibration resistance. Modules can be removed without interfering with field wiring.

For each I/O module, there are three isolated common terminal groups: Group A (internally connected together) and Group B (internally connected together) are typically used for power connections. Group E has five common terminals that are internally connected together and isolated from the power supply and point terminals. They can be used as application wiring. Terminals 1-16 are used for I/O connections.

GE IC670CHS102 接线端子带盒式端子

【其他型号推荐】