GE IC694ACC300 输入模拟器模块

【产品详情】

 来自RX694i PacSystems系列的GE Fanuc IC300ACC3输入模拟器模块可以模拟8或16点的真实输入模块的功能。它没有现场连接，但可用于正在开发、测试和调试的系统。

IC694ACC300模块由GE Fanuc设计，制造和分销，作为GE Fanuc RX3i PacSystem产品线中的输入模拟器模块。IC694ACC300输入模拟器模块旨在与RX3i CPU的所有可用版本兼容，这意味着它可以用于大多数RX3i工业系统。此输入模拟器模块是离散输入模块。IC694ACC300输入模拟器模块兼容热插拔，但如果热插拔，则必须正确热插拔，否则可能会损坏或无法正常运行。要正确热插拔此离散输入仿真器模块，请确保在 2 秒内将其正确定位在其托架中（如果它是插入而不是从系统中取出）。

GE Fanuc RX3i IC694ACC300输入模拟器模块在载体中的正确位置要求模块在 2 秒内接合其锁存器并连接其所有引脚。要在热插拔拆卸中卸下此模块，必须在 2 秒内断开所有引脚和闩锁。模块在安装或拆卸时不应保持部分插入状态，并且必须至少 2 秒的跨度通过模块的插入和移除以避免错误。IC694ACC300输入模拟器模块的最大负载要求是 120 毫安电流和 0.6 瓦功率（5 伏直流电）。该模块没有现场连接，但它可以模拟正在测试和调试的系统中 8 点或 16 点输入模块的功能。

GE IC694ACC300 输入模拟器模块

【英文介绍】

The GE Fanuc IC300ACC3 input simulator module from the RX694i PacSystems family can simulate the functions of a real input module at 8 or 16 points. It has no field connectivity, but can be used for systems under development, testing, and commissioning.

The IC694ACC300 module is designed, manufactured and distributed by GE Fanuc as an input simulator module in the GE Fanuc RX3i PacSystem product line. The IC694ACC300 input emulator module is designed to be compatible with all available versions of the RX3i CPU, which means it can be used with most RX3i industrial systems. This input simulator module is a discrete input module. The IC694ACC300 input simulator module is hot-swappable, but if it is hot-swappable, it must be hot-swappable correctly, otherwise it may become damaged or not function properly. To properly hot-swap this discrete input emulator module, make sure to position it correctly in its carrier within 2 seconds (if it is inserted rather than removed from the system).

The correct position of the GE Fanuc RX3i IC694ACC300 input simulator module in the carrier requires the module to engage its latch and connect all of its pins within 2 seconds. To remove this module in a hot-swappable removal, all pins and latches must be disconnected within 2 seconds. Modules should not remain partially inserted when installed or removed, and a span of at least 2 seconds must pass through module insertion and removal to avoid errors. The maximum load requirement for the IC694ACC300 input simulator module is 120 mA current and 0.6 watts of power (5 volts DC). The module has no field connection, but it can simulate the functionality of an 8-point or 16-point input module in a system that is being tested and debugged.

GE IC694ACC300 输入模拟器模块

【其他型号推荐】